Ironing & pressing
Press flat seams, support curves with a ham or roll, and set flat finishes with a clapper.
Start here
1Test a scrap
Test heat and steam on a scrap from your kit. Check the print and fabric before pressing your pieces. Use a pressing cloth if needed.
2Set the seam
After machine sewing, remove the basting. Keep the layers together and briefly press along the sewn line to settle the stitches.
Flat surface
Straight seams and flat folds.
1Press allowances open
Open the pieces, with the wrong side up. Spread the two allowances away from the stitch line and press them onto their own sides.
2Optional: set a crisp edge
On a flat pressing surface, press the seam or folded edge with the heat and steam your fabric allows. Lift the iron away.
3Hold the clapper on the warm seam
Immediately place the flat wooden clapper on the pressed area. Hold it still with gentle pressure as the seam cools.
4Lift and check
Lift the clapper once the fabric has cooled and dried. Check for a flat seam. Use the ham or roll again if the shape needs to stay rounded.
Tailor’s ham
Rounded seams and shaped areas.
1Choose the ham
Use the rounded ham to support curved seams. Choose the part whose curve matches your piece.
2Rest the curve on the ham
Wrong side up. Set the seam over the rounded surface and spread the allowances apart. Keep the fabric relaxed.
3Press a small section
Place the iron tip between the allowances. Press, lift and move. Let the fabric cool on the ham so it keeps its curve.
Seam roll
Narrow seams and gentle curves.
1Use the roll for a narrow seam
Lay the seam along the top of the roll. Let the rest of the fabric hang to the sides, clear of the iron.
2Press along the roll
Keep the iron tip on the seam. Press short sections without flattening the garment around it. Lift before moving.
Finish on your chosen surface
1Press, lift, move
Press, lift, then move. Keep the fabric supported on your chosen surface and let it cool in shape.
2Press the right side
Turn the work over and press the join from the right side.
Tips
1Test your fabric
Test heat and steam on a scrap. Use a pressing cloth if needed. The ham, roll and clapper are optional tools, available separately.