Give a gift card. Let them choose their next make. Shop gift cards Skip to content

Position pieces

Place the pieces right sides together, keep the start at the top, and point the seam allowance to the right.

  1. 1Turn printed sides together

    Place the printed sides of the pieces together.

    Turn printed sides together. Place the printed sides of the pieces together.

    Place the printed sides of the pieces together.

  2. 2Align the matching seam

    Align the pieces so that the start point on each edge align. If possible, roughly align the matching dots on the rest of the edge.

    Align the matching seam. Align the pieces so that the start point on each edge align. If possible, roughly align the matching dots on the rest of the edge.

    Align the pieces so that the start point on each edge align. If possible, roughly align the matching dots on the rest of the edge.

  3. 3Check left and right

    Orient the stack of pieces so that the seam allowance faces your right, and the start of the edge is further away from you.

    Check left and right. Orient the stack of pieces so that the seam allowance faces your right, and the start of the edge is further away from you.

    Orient the stack of pieces so that the seam allowance faces your right, and the start of the edge is further away from you.

Preparation guides
  1. 1Find the cut line

    Find the outermost solid black line. The arrow points to the cut line; keep the seam allowance inside it.

    Find the cut line. Find the outermost solid black line. The arrow points to the cut line; keep the seam allowance inside it.

    Find the outermost solid black line. The arrow points to the cut line; keep the seam allowance inside it.

  2. 2Cut along the line

    Cut on the outermost solid black line with the fabric scissors.

    Cut along the line. Cut on the outermost solid black line with the fabric scissors.

    Cut on the outermost solid black line with the fabric scissors.

  3. 3Lift out the cut piece

    Remove the surrounding cloth. Keep the full marked seam allowance attached.

    Lift out the cut piece. Remove the surrounding cloth. Keep the full marked seam allowance attached.

    Remove the surrounding cloth. Keep the full marked seam allowance attached.

Tips
  1. 1Tips 1

    If the seam is curved in different directions, alignment will be hard. Do not worry -- basting in the next step will force them into alignment.

    Tips 1. If the seam is curved in different directions, alignment will be hard. Do not worry -- basting in the next step will force them into alignment.

    If the seam is curved in different directions, alignment will be hard. Do not worry -- basting in the next step will force them into alignment.