Give a gift card. Let them choose their next make. Shop gift cards Skip to content

Placement under foot

Place pieces in sewing machine, lower the needle at the start of your traced path, then lower the foot.

  1. 1Meet the machine

    Find the presser foot and needle, the cutter on the left, and the handwheel on the right.

    Meet the machine. Find the presser foot and needle, the cutter on the left, and the handwheel on the right.

    Find the presser foot and needle, the cutter on the left, and the handwheel on the right.

  2. 2Raise the needle and foot

    Raise the presser foot and the needle so you have clearance to slide your pieces in.

    Raise the needle and foot. Raise the presser foot and the needle so you have clearance to slide your pieces in.

    Raise the presser foot and the needle so you have clearance to slide your pieces in.

  3. 3Slide the fabric in

    Slide basted pieces under the raised presser foot with the traced line facing up and seam allowance on the right.

    Slide the fabric in. Slide basted pieces under the raised presser foot with the traced line facing up and seam allowance on the right.

    Slide basted pieces under the raised presser foot with the traced line facing up and seam allowance on the right.

  4. 4Align the starting point

    Align the basted seam under the needle so the needle will land just to the left of the start knot on the traced line.

    Align the starting point. Align the basted seam under the needle so the needle will land just to the left of the start knot on the traced line.

    Align the basted seam under the needle so the needle will land just to the left of the start knot on the traced line.

  5. 5Lower the needle

    Turn the handwheel toward you to lower the needle onto the start of your traced line. If the point is off, continue turning toward you to raise the needle, reposition the fabric, and try again.

    Lower the needle. Turn the handwheel toward you to lower the needle onto the start of your traced line.

    Turn the handwheel toward you to lower the needle onto the start of your traced line.

    More help

    Turn the handwheel toward you to lower the needle onto the start of your traced line. If the point is off, continue turning toward you to raise the needle, reposition the fabric, and try again.

  6. 6Pivot on the needle

    Once the needle is piercing the right spot, pivot your pieces around the needle so that the beginning of your path points straight toward you. When your machine starts, it will go straight, so you want the first stitch to travel along your path.

    Pivot on the needle. Once the needle is piercing the right spot, pivot your pieces around the needle so that the beginning of your path points straight toward you.

    Once the needle is piercing the right spot, pivot your pieces around the needle so that the beginning of your path points straight toward you.

    More help

    Once the needle is piercing the right spot, pivot your pieces around the needle so that the beginning of your path points straight toward you. When your machine starts, it will go straight, so you want the first stitch to travel along your path.

  7. 7Lower the foot

    Lower the presser foot to clamp the fabric in place.

    Lower the foot. Lower the presser foot to clamp the fabric in place.

    Lower the presser foot to clamp the fabric in place.

Preparation guides
  1. 1Thread the sewing machine

    Thread the sewing machine

    Thread the sewing machine. Find the parts used to thread and sew.

    Find the parts used to thread and sew.

    Open full guide →
Tips
  1. 1Tips 1

    Always double check that your needle is still threaded in the end!

    Tips 1. Always double check that your needle is still threaded in the end!

    Always double check that your needle is still threaded in the end!