Give a gift card. Let them choose their next make. Shop gift cards Skip to content

Trace the sewing path

Draw a line just left of the basting stitch.

  1. 1Put the allowance on the right

    Orient your piece so that the seam allowance is on the right, and the starter knot is facing up, further away from you than the end knot.

    Put the allowance on the right. Orient your piece so that the seam allowance is on the right, and the starter knot is facing up, further away from you than the end knot.

    Orient your piece so that the seam allowance is on the right, and the starter knot is facing up, further away from you than the end knot.

  2. 2Trace beside the basting

    Use a pencil to sketch a line directly to the left of your basting stitches, connecting the basted points. Your line should be on the outermost boundary of your printed design, not in the seam allowance.

    Trace beside the basting. Use a pencil to sketch a line directly to the left of your basting stitches, connecting the basted points.

    Use a pencil to sketch a line directly to the left of your basting stitches, connecting the basted points.

    More help

    Use a pencil to sketch a line directly to the left of your basting stitches, connecting the basted points. Your line should be on the outermost boundary of your printed design, not in the seam allowance.

Tips
  1. 1Tips 1

    Use a flare tip marker to mark the dots on the right side, so that you can see the bleed on the wrong side. This may help you draw the trace line faster.

    Tips 1. Use a flare tip marker to mark the dots on the right side, so that you can see the bleed on the wrong side. This may help you draw the trace line faster.

    Use a flare tip marker to mark the dots on the right side, so that you can see the bleed on the wrong side. This may help you draw the trace line faster.

  2. 2Tips 2

    If you have a lit surface (e.g. window in the daytime, sketching lightbox), you can use while tracing to easily see the dots.

    Tips 2. If you have a lit surface (e.g. window in the daytime, sketching lightbox), you can use while tracing to easily see the dots.

    If you have a lit surface (e.g. window in the daytime, sketching lightbox), you can use while tracing to easily see the dots.